logo

pic
Search
搜索
Search
img
New Center
We Are Supplying The Machines To Metal Cutting And Engineering Industries.
/
/
/
How to use the bending machine

How to use the bending machine

  • Categories:News
  • Time of issue:2021-02-18 15:50
  • Views:

(Summary description)According to the ordinary hydraulic bending machine processing

How to use the bending machine

(Summary description)According to the ordinary hydraulic bending machine processing

  • Categories:News
  • Time of issue:2021-02-18 15:50
  • Views:
Information

According to the ordinary hydraulic bending machine processing

Q235 sheet material to do a brief introduction:

1. First, connect the power supply, open the key switch on the control panel, and then press the oil pump to start.

2, travel adjustment, the use of the bending machine must pay attention to adjust the travel, before bending must be tested. A plate thickness clearance must be ensured when the die moves down to the bottom of the bending machine. Otherwise, it will cause damage to the mold and machine. The adjustment of the stroke is also electric quick adjustment and manual fine tuning.

3, bending groove selection, generally choose the plate thickness of 8 times the width of the groove. Such as bending 4mm sheet material, need to choose about 32 notch.

4, the rear stopper adjustment is generally electric quick adjustment and manual fine tuning, the method is the same as the plate shearing machine.

5, step down the foot switch to start bending, bending machine and shearing machine is different, can be released at any time, loosen the foot bending machine will stop, and then step on the downward.

Scan the QR code to read on your phone

Monar

Mobile website

Contact number

Add:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161


E-mailraxshi@qq.com

              raxshi@monar.net


Webwww.monar.net

Copyright © Changzhou Monar International Trading    苏ICP备xxxxxxxx号     Powered by 300.cn