logo

pic
Search
搜索
Search
img
Solution
We Are Supplying The Machines To Metal Cutting And Engineering Industries.
Current location:
Homepage
/
/
CNC bending machine of the three main steps

CNC bending machine of the three main steps

  • Categories:solution
  • Time of issue:2021-02-18 16:07
  • Views:

(Summary description)The first is to connect the power transformer, open the key power switch on the actual operation control panel, and then press the oil pump to start, because I heard the sound of the oil pump (at this time, the machine and equipment are not posture).

CNC bending machine of the three main steps

(Summary description)The first is to connect the power transformer, open the key power switch on the actual operation control panel, and then press the oil pump to start, because I heard the sound of the oil pump (at this time, the machine and equipment are not posture).

  • Categories:solution
  • Time of issue:2021-02-18 16:07
  • Views:
Information

The work of CNC bending machine is closely related to the operator. The following mesh is made according to the general hydraulic machine bending machine to produce Q235 steel plate to do. The operation process of CNC bending machine is simple and simple.

1. Connect the power transformer and start the oil pump.

The first is to connect the power transformer, open the key power switch on the actual operation control panel, and then press the oil pump to start, because I heard the sound of the oil pump (at this time, the machine and equipment are not posture).

Two, adjust the CNC bending machine travel arrangement

The use of CNC bending machine should pay attention to adjust the travel arrangement as far as possible, be sure to test run before sheet metal bending. When the inner die of the bending machine slides down to the bottom, try to ensure that there is a gap of plate thickness, otherwise it will cause damage to the mold and machine equipment. The adjustment of travel arrangement is all pneumatic quick adjustment and hand - pull adjustment.

Three, choose sheet metal bending slot hole

Sheet metal bending slot selection, generally to choose the plate thickness of 8 times the total width of the slot. Such as sheet metal bending 4mm thick steel plate, need to choose about 32 slots.

Finally, CNC bending machine operators also need to grasp that the rear stopper adjustment is often pneumatic rapid adjustment and hand-pulled adjustment, the method is the same as the hydraulic shears. Press the button switch at the beginning of sheet metal bending, CNC bending machine and hydraulic shearing machine is not the same, can be loose at any time, loose foot CNC bending machine will stop, and then step down again.

Scan the QR code to read on your phone

Monar

Mobile website

Contact number

Add:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161


E-mailraxshi@qq.com

              raxshi@monar.net


Webwww.monar.net

Copyright © Changzhou Monar International Trading    苏ICP备2021001368号-1     Powered by 300.cn