logo

pic
Search
搜索
Search
img
New Center
We Are Supplying The Machines To Metal Cutting And Engineering Industries.
/
/
/
Do you know the cleaning method of different lenses for customized Laser welding machine supplier?

Do you know the cleaning method of different lenses for customized Laser welding machine supplier?

(Summary description)customized Laser welding machine supplier is a new welding method mainly for thin-walled, refined parts welding, which can complete spot welding, butt welding, stitch welding, sealing welding, etc.

Do you know the cleaning method of different lenses for customized Laser welding machine supplier?

(Summary description)customized Laser welding machine supplier is a new welding method mainly for thin-walled, refined parts welding, which can complete spot welding, butt welding, stitch welding, sealing welding, etc.

Information

customized Laser welding machine supplier is a new welding method mainly for thin-walled, refined parts welding, which can complete spot welding, butt welding, stitch welding, sealing welding, etc., with high aspect ratio, small weld width, and deformation Small, fast welding speed, flat and smooth welding seam, no need to deal with after welding or only simple processing, high welding seam quality, no air holes, accurate control, small focus spot, high positioning accuracy, easy to complete automation. The following editor will introduce the cleaning methods for different lenses of the customized Laser welding machine supplier.


1. Cleaning of the gathering lens: When disassembling and assembling, pay attention not to use too much force and not to collide with hard objects. It is necessary to ensure that the air pressure is satisfied when the equipment is operated. The cleaning principle of the gathering lens is to clean as far as possible without pollution. When there is pollution, it needs to be cleaned in time. When cleaning the lens, use a laboratory-grade paper soft cotton ball, dip in an appropriate amount of acetone or high-purity alcohol, and quietly move it in a clockwise direction. The center of the lens rotates and rubs toward the edge. When necessary, both sides of the lens need to be cleaned, and you should be careful when wiping.
2. Cleaning the mirror lens: remove the lens from the frame; put the lens paper on the lens surface with the mirror side up; put a few drops of acetone on the lens paper, and gently pull the lens paper over the mirror surface; repeat the above process until The mirror surface is clean, and there is no dirt and residue left on the mirror surface; then put the lens into the lens holder. If a molybdenum mirror is used as a mirror, since it cannot be coated, it can be used directly after polishing, so it can be cleaned with water (soap or water containing detergent). However, other lenses with coating on the surface cannot be cleaned with water. Because many coatings dissolve in water, the lens will be damaged.
The above is a brief introduction to the cleaning methods of different lenses of the customized Laser welding machine supplier. I hope you can learn more about it through the introduction of the above editor.

Keyword:

Scan the QR code to read on your phone

Monar

Mobile website

Contact number

Add:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161


E-mailraxshi@qq.com

              raxshi@monar.net


Webwww.monar.net

Copyright © Changzhou Monar International Trading    苏ICP备xxxxxxxx号     Powered by 300.cn