logo

pic
Search
搜索
Search
img
New Center
We Are Supplying The Machines To Metal Cutting And Engineering Industries.
/
/
/
How much do you know about the maintenance knowledge of customized Rivet Machine?

How much do you know about the maintenance knowledge of customized Rivet Machine?

  • Categories:News
  • Time of issue:2021-07-30 14:22
  • Views:

(Summary description)First, you need to turn off the power, and clean up in accordance with the principle of from the inside out and from top to bottom.

How much do you know about the maintenance knowledge of customized Rivet Machine?

(Summary description)First, you need to turn off the power, and clean up in accordance with the principle of from the inside out and from top to bottom.

  • Categories:News
  • Time of issue:2021-07-30 14:22
  • Views:
Information

How much do you know about the maintenance knowledge of customized Rivet Machine? Follow the editor to have a simple understanding!
1. First, you need to turn off the power, and clean up in accordance with the principle of from the inside out and from top to bottom.
2. Cleaning the rivet storage slot: remove the rivet storage slot and take out the excess rivets to prevent the remaining rivets from being confused during subsequent production and cause damage to the riveted product. Clean it with cotton cloth and reinstall it after cleaning.
3. Clean the guide rail, pull the guide rail to block the remaining rivets in the guide rail to flow into the guide groove of the chuck mouth, press down the sliding frame to take out the remaining rivets from the chuck mouth, and wipe the guide rail, chuck mouth and upper die rod with cotton cloth. .
4. To clean the funnel, unscrew the fixed nut of the funnel, remove the compression spring, remove the funnel, use a flat-blade screwdriver to clean the excess rivets in the funnel, wipe it clean with a cotton cloth, and reinstall it in the order of disassembly.
5. Clean the lower mold base, remove the protective cloth cover of the lower mold base, and clean the remaining gaskets on the floating needle.
6. Peripheral cleaning, clean the surface of the machine, if the machine is not clean or there is tape, you can use banana water to wipe it.
7. To clean the rocker arm and motor, first clean the motor cover and then the belt reel and belt protection cover. If the motor is hot and the dust is too much, it will cause damage to the motor.
8. Try it out, plug in the power after cleaning, turn on the power to turn on the equipment, and check whether each part is operating normally before it can be put into production.
The above is an introduction to the maintenance knowledge of the customized Rivet Machine.

Keyword:

Scan the QR code to read on your phone

Monar

Mobile website

Contact number

Add:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161


E-mailraxshi@qq.com

              raxshi@monar.net


Webwww.monar.net

Copyright © Changzhou Monar International Trading    苏ICP备2021001368号-1     Powered by 300.cn