logo

pic
Search
搜索
Search
img
New Center
We Are Supplying The Machines To Metal Cutting And Engineering Industries.
/
/
/
The hydraulic control form of customized Hydraulic Press Brake!

The hydraulic control form of customized Hydraulic Press Brake!

(Summary description)The form of the central control block is to combine three control blocks into one control block. It is mainly used in some special structure bending machines. Due to control reasons, the connecting pipes between the control block and the two hydraulic cylinders must be arranged symmetrically, and the maximum allowable distance between the two hydraulic cylinders (about 3m) must be ensured. Therefore, the central control block should be arranged as much as possible In the center of the machine.

The hydraulic control form of customized Hydraulic Press Brake!

(Summary description)The form of the central control block is to combine three control blocks into one control block. It is mainly used in some special structure bending machines. Due to control reasons, the connecting pipes between the control block and the two hydraulic cylinders must be arranged symmetrically, and the maximum allowable distance between the two hydraulic cylinders (about 3m) must be ensured. Therefore, the central control block should be arranged as much as possible In the center of the machine.

Information

The hydraulic control system of customized Hydraulic Press Brake is the central brain of the bending machine itself. In the production of the bending machine, a high automation rate and standardization rate are required. Therefore, the hydraulic system is also limited to hydraulic control methods. The different structural types and principles of these methods have been generally recognized by the market.
1. Central control block
The form of the central control block is to combine three control blocks into one control block. It is mainly used in some special structure bending machines. Due to control reasons, the connecting pipes between the control block and the two hydraulic cylinders must be arranged symmetrically, and the maximum allowable distance between the two hydraulic cylinders (about 3m) must be ensured. Therefore, the central control block should be arranged as much as possible In the center of the machine.


2. Three control blocks
This style has three control blocks. Two main control blocks with associated intermediate plate filling valves are directly installed on the hydraulic cylinder, realizing a pipeless connection between the main control block and the hydraulic cylinder cavity.
3. Interface distributor for sensor and axis
In the application of the bending machine, the central control block concentrates all the solenoid valves in one control block. Similarly, the electrical wiring of each valve is also concentrated on a cable line to realize a common connection. For this reason, an interface distributor is also set on the central control block of the bending machine.
The above is an analysis of the relevant knowledge about the hydraulic control form of the customized Hydraulic Press Brake.

Keyword:

Scan the QR code to read on your phone

Monar

Mobile website

Contact number

Add:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161


E-mailraxshi@qq.com

              raxshi@monar.net


Webwww.monar.net

Copyright © Changzhou Monar International Trading    苏ICP备2021001368号-1     Powered by 300.cn