The working principle of 800MRRP series: This equipment is a through-type processing equipment. The conveying mechanism is equipped with conductive disk (full magnetic). Group universal roller brush combination, the universal roller brush combination revolves and rotates at high speed, so that the edge of the workpiece and the inner hole burr are removed and the R angle is uniform (the size of the R angle can be achieved by choosing different processes and abrasive belts). , The abrasive belt station and the universal roller brush station can also operate independently: the independent operation of the abrasive belt station can achieve the effects of drawing, polishing, descaling, and slag removal on the metal sheet surface; the universal roller brush can operate independently Realize 360-degree deburring and chamfering without dead ends. This equipment adopts high temperature resistant conveyor belt to convey the workpiece, frequency conversion speed regulation, and the conveying platform is equipped with conductive magnets, which is aimed at the conveying and deburring of small carbon steel parts. Equipped with a 5.5 dry-watt wet vacuum cleaner to suck most of the dust when working.
Suitable blanking process: laser cutting, plasma, flame, NCT blanking, die stamping, shear cold processing.
Suitable plates: carbon steel; (coated workpieces, stainless steel, aluminum plates need to be processed with fixtures)
Equipment processing width options: 800mm, 1000mm, 1300mm, 1600mm
Maximum processing width: 800
Processing thickness: 0.5-100mm
Minimum processing size: 20*20 (conductive magnetic attraction)
Feeding speed: 0.5-5m/min
Rotary brush speed: 9-20r/min
Abrasive belt size: 1900 x820 mm
Shaft brush size: φ300 x300mm
Chamfering range: R0.1~0.5
Work surface: 900-980mm
Machine size: 3200mm* 1600mm*2250mm
LISTEN TO THE VOICE OF EVERY CUSTOMER