Description of structural advantages of discount pneumatic rivetless riveting machine:
1. Reliable cast steel body, 500mm super large throat depth, can be flexibly adapted to different processing requirements;
2. The discount pneumatic rivetless riveting machine adopts the gas-hydraulic pressurized cylinder as the pneumatic actuator, which has a unique "soft" in place feature to meet the use of rivetless mold connections, and the stamping force ranges from 20kn to 80kn;
3. The discount pneumatic rivetless riveting machine has fast speed and high efficiency, and does not damage the original coating or paint layer on the surface of the plate, and has no pressing deformation. Compared with spot welding, the cost can be saved by 30-60%;
4. No punching, no waste, no iron filings, the dynamic fatigue connection strength of single-point connection is much higher than that of spot welding, and the static connection strength is 70% of spot welding. Multiple points can be connected at the same time, with high efficiency;
5. The discount pneumatic rivetless riveting machine can be used for non-destructive testing, optional automatic feeding, laser alignment device and anti-pressure hand device, etc.;
6. The discount pneumatic rivetless riveting machine adopts imported touch screen as data input. The imported load cell is used as the pressure acquisition signal. The system can calculate the pressure signal and displacement signal at a speed of 500 times per second, and make various alarms and curve descriptions.
7. The upper and lower limit curves of displacement and pressure can be set in advance to compare with the current press-fitting value, input any press-fitting position, and the interference resistance of the position at the last press-fitting can be obtained.