Determine the tonnage and bending length of the bending machine.

The form of the central control block is to combine three control blocks into one control block. It is mainly used in some special structure bending machines. Due to control reasons, the connecting pipes between the control block and the two hydraulic cylinders must be arranged symmetrically, and the maximum allowable distance between the two hydraulic cylinders (about 3m) must be ensured. Therefore, the central control block should be arranged as much as possible In the center of the machine.

The customized Hydraulic Press Brake includes a bracket, a workbench and a clamping plate. The workbench is placed on the bracket. The workbench is composed of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base is composed of a housing, a coil and a cover plate. The coil It is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate.

Manufacturers of CNC hydraulic press brakes should improve their competitiveness, reflect and analyze the structure and functional performance of the press brakes, identify defects, and carry out reforms.

The customized Hydraulic Press Brake includes a bracket, a workbench and a clamping plate. The workbench is placed on the bracket. The workbench is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a housing, a coil and a cover plate. The coil It is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the wire is energized to the coil, and the gravitational force is generated on the pressing plate after being energized, so as to realize the clamping of the thin plate between the pressing plate and the base.

Hydraulic press brake is a mechanical part that stops or decelerates moving parts in machinery.