logo

pic
Search
搜索
Search
img
New Center
We Are Supplying The Machines To Metal Cutting And Engineering Industries.
/
/
/
The operating procedure of Wholesale V-grooving Machine price

The operating procedure of Wholesale V-grooving Machine price

  • Categories:News
  • Time of issue:2022-03-04 14:34
  • Views:

(Summary description)Before the machine tool is started, it is necessary to carefully check whether the tool, the nut and the screws of each part are firm. If any looseness is found, it needs to be tightened in time;

The operating procedure of Wholesale V-grooving Machine price

(Summary description)Before the machine tool is started, it is necessary to carefully check whether the tool, the nut and the screws of each part are firm. If any looseness is found, it needs to be tightened in time;

  • Categories:News
  • Time of issue:2022-03-04 14:34
  • Views:
Information

Do you know the operating procedure of Wholesale V-grooving Machine price? Let’s take a look at it briefly below!
1. Before the machine tool is started, it is necessary to carefully check whether the tool, the nut and the screws of each part are firm. If any looseness is found, it needs to be tightened in time;
2. Pay attention to the cutting direction when installing the tool, and do not reverse it;
3. The main tool turns clockwise;
4. Before feeding and grooving, first confirm whether the pneumatic device is turned on and press the workpiece on the movable push table and against the positioning plate, and the hand is not allowed to approach the knife edge;
5. When the machine tool fails, the power supply should be cut off immediately, and the operation should be stopped, and a special person should be sent to repair and adjust the machine. The machine tool is not allowed to operate with illness;


6. Before processing the material, first check whether there are iron nails, sand and stone joints, etc. on the tool to prevent damage to the tool joint and fly out and hurt people;
7. To clean the machine tool, wipe the lubricating oil, remove and replace the saw blade and clean the cutting edge debris, etc., it is necessary to cut off the power supply of the machine tool;
8. The machine tool must be operated, adjusted and maintained by designated personnel, and personnel unfamiliar with the machine tool are strictly prohibited from using it;
9. Workers should wear protective equipment such as earplugs and goggles when operating.
The above is a brief introduction to the operating procedures of Wholesale V-grooving Machine price.

Keyword:

Scan the QR code to read on your phone

Monar

Mobile website

Contact number

Add:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161


E-mailraxshi@qq.com

              raxshi@monar.net


Webwww.monar.net

Copyright © Changzhou Monar International Trading    苏ICP备2021001368号-1     Powered by 300.cn