We Are Supplying The Machines To Metal Cutting And Engineering Industries.

Solution

Feed Leveler Wholesale Price talks about the reason for the temperature rise and expansion of the leveler


Release time:

2022-06-15

During the work of the straightening machine, the rotation of the main shaft and the feed speed are higher than that of the ordinary machine tool, so that the heat emitted by the heat sources such as bearings, motors and hydraulic systems on the straightening machine, chips and cutting tools and workpieces The heat generated by the friction of relative motion will be transferred to the various parts of the machine tool through its convection, conduction and radiation.

What is the reason for the temperature rise and expansion of the leveler? The Feed Leveler Wholesale Price editor will take you to a brief look at it.
During the work of the straightening machine, the rotation of the main shaft and the feed speed are higher than that of the ordinary machine tool, so that the heat emitted by the heat sources such as bearings, motors and hydraulic systems on the straightening machine, chips and cutting tools and workpieces The heat generated by the friction of relative motion will be transferred to the various parts of the machine tool through its convection, conduction and radiation. In this way, the straightening will cause temperature rise and thermal expansion. During the operation, due to the uneven distribution of the heat source, the heat dissipation performance of the equipment is different, which will cause the quality of each part to be unequal, which will directly lead to various parts of the machine tool. The temperature rise is inconsistent, which will directly produce uneven thermal expansion and deformation in the case of uneven temperature.
There are many strong cutting processes in the straightening machine, so the worktable and the main shaft of the equipment should be inclined or vertical layout as much as possible, which is more conducive to shoulder row. In the process of laying out the straightener, the internal heat source should be reduced, and the electric motor and hydraulic system should be placed outside the machine tool as much as possible. The chips generated during the processing are also a heat source that cannot be ignored. If the cutting is not discharged from the inside of the machine tool in time, it will directly cause the deformation of the machine tool.
In the process of using the straightening machine, it will directly affect the correct relative position of the workpiece and the tool, which will directly affect the machining accuracy and reduce the thermal degeneration of the machine tool. The main reason for thermal deformation.
The above is the editor of Feed Leveler Wholesale Price: the introduction of the reasons for the temperature rise and expansion of the leveler.