Operation precautions of Feed Leveler in china
Release time:
2022-06-22
Before starting the machine, check whether the hydraulic oil of the hydraulic station, the gear oil of the reduction box and the transmission box are full.
Do you know what are the precautions for the operation of Feed Leveler in china? Let's have a simple understanding together!
1. Before starting the machine, check whether the hydraulic oil of the hydraulic station, the gear oil of the reduction box and the gear box of the transmission box are full.
2. Before starting the main motor, check and adjust the angle of rotation and adjust the working pressure of the hydraulic system.
3. Inject lubricating oil into each lubricating point, and check the operation of the mechanical transmission part to make it flexible for transportation.
4. Operators should wear labor protection equipment, and must not leave their posts or join posts after starting the machine.
5. After the oil temperature and oil pressure of the hydraulic station are stable, the upper straightening roller is lifted to the initial position.
6. Manually receive the material, send the steel pipe through the third pair of straightening rollers, and then press down and clamp the upper straightening roller.
7. Start the main motor, the steel pipe rotates forward and straightens at the same time.
8. The motor stops, the straightening roller stops straightening, the upper straightening roller is lifted, and the straightened steel pipe is sent out.
9. If you need to reverse and straighten, you can use the reversal knob on the operating table to reverse the host to perform reverse straightening.
10. The main motor stops, the straightening roller stops straightening, the steel pipe is returned to the starting position, and the next straightening program command is to be repeated.
11. After shutdown, turn off the main power supply and do not change the program controller at will.
The above is a brief introduction to the knowledge related to the use of Feed Leveler in china.