In this issue, we will introduce the maintenance method of Radial Riveting Machine - Pneumatic Riveting Machine. According to the following points, maintenance and use of Radial Riveting Machine - Pneumatic Riveting Machine will effectively reduce the failure rate of equipment and improve the life of equipment and parts.
1. Regularly lubricate the spherical pair and gears. It is recommended to grease the Radial Riveting Machine - Pneumatic Riveting Machine weekly. When adding butter, turn on the spindle motor, so that the butter can be added evenly. Ordinary standard riveting machines use a grease gun or a syringe to add butter; riveting machines equipped with an automatic lubrication pump can start the refueling button;
2. Regularly check whether the Radial Riveting Machine - Pneumatic Riveting Machine leaks oil. Including external leakage and internal leakage. If any abnormality is found, replace the sealing ring in time;
3. The pressure of the hydraulic station shall not exceed 2.5Mpa;
4. Before the main shaft motor of the equipment is turned on, do not press riveting parts and others, so as not to damage the spherical pair;
5. Use the rivet head in strict accordance with the spherical pair standard.

6. Check whether the Radial Riveting Machine - Pneumatic Riveting Machine has abnormal noise and heat. If the bearing is checked, whether the spindle needs to be replaced and repaired;
7. The sealing ring of the rivet head should be replaced in time;
8. The length of the rivet head must be used in strict accordance with the specifications of the spherical pair, and must not be lengthened or shortened at will. It is stipulated that the error of the protruding length of the rivet head does not exceed ±0.5mm;
9. The time for riveting parts shall not exceed 4 seconds. Prevent the spherical surface from rubbing for too long and burn out the spherical surface pair.
10. The hydraulic oil in the hydraulic station of the Radial Riveting Machine - Pneumatic Riveting Machine should be replaced once a year.