Product classification

Contact us

Phone:+8613801501050

E-mail:raxshi@qq.com

            raxshi@monar.net

Address:2104,Tower B, World Trade Center, No.16 Yanzhen Avenue, Wujin distrct,Changzhou, Jiangsu, China 213161

V-grooving Machine

Servo precision levelers are specifically designed for higher leveling operations. Such as the XL-EPM servo precision leveling machine produced by Xuelong. The leveling rolls are optimally supported with a small spacing between each other.

Category:

keyword:Servo precision leveling | Deburring machine

Product Description

Vkbg vertical grooving machine
Vkbg series slotting machine is the upgrade product of traditional slotting machine. It adopts frame structure, whole stress relief and tempering, whole welding connection, good rigidity and small deformation. This series of crossbeams are fixed, and the workpieces are fed in by the back feeding mechanism. The worktable is made of carbon tool steel. After high frequency surface quenching, the hardness of the worktable reaches 55-60hrc (ordinary worktable < 30hrc), which makes the hardness of the worktable far greater than that of stainless steel. It completely solves the problem of groove marks caused by the low hardness of the worktable of traditional machines, and ensures that the flatness of the worktable is ≤± 0.03mm The deformation of worktable reduces the accuracy of V-groove and prolongs the service life of the equipment. Both the front and back of the worktable are equipped with supporting devices to prevent the sheet from scratch during the processing.
Performance and characteristics

  • The fuselage is welded with all steel. After heat treatment, the internal stress is removed. It has high strength and no deformation

  • The CNC system of Taiwan Yitu has mature technology and stable and reliable product performance.

  • All electrical appliances are manufactured by Schneider company, one of the three famous electrical manufacturers in the world, which ensuresthe service life and stability of the circuit.

  • Japan oil research hydraulic control system, pressure plate, jaw pressing and loosening fully automatic, processing process, will not loose plate, pressure stable and reliable.

  • Servo motor feed, high precision and reliable, up to 0.01mm

  • Servo motor control tool holder and feeding device, accurate planing and positioning.

  • The traditional nut screw drive mode of the turret is replaced by the forging copper gear tooth drive mode. With the help of Taiwan Liming precision planetary reducer and Taiwan Yitu high-power servo motor, the turret is easier to maintain, with lower failure rate, faster return speed, higher efficiency, more stable and silent operation.

  • The worktable is made of carbon tool steel, and its hardness reaches 55-60hrc after high frequency surface quenching (ordinary worktable < 30hrc)

  • The worktable is equipped with mechanical compensation, and the depth error of V groove can be adjusted after long-time use

  • Three cutters can be used to process "V" groove, so the cutting quantity is evenly distributed and the deformation of machined parts is reduced.

  • The operation of the turret is completely closed, and the operation is safe

Technical parameter

Model

VKBG-4000/1500

Material

STS304&Q235

Length

4000mm

Width

1500mm

Thickness

0.5mm-4mm(Flatness of sheet metal<3mm )

Minimum edge

13mm

Control Type

3-axis CNC control(X、Y、Z)

Display

15 Inch High Definition LCD touch screen

Memory Capacity

20 groups, 112 channels / group (can add SD card expansion)

Working System

Ball screw / linear guide / rack and pinion

Forward-Cutting

65m/min

Backward

65m/min

Feeding

15m/min

Z-Axis UP-Down

10m/min

Y Precision

0.001mm

Y Stoke

1500mm

Z Precision

0.001mm

Z Stoke

30mm

X-Axis

servo motor 

Z-Axis

servo motor  

Y-Axis

servo motor

hydraulic 

6-10Mpa

Length

5800mm

Width

2550mm

Highth

2000mm

Weight

10000kg

Table Flatness

±0.02mm/M

Main Power

380V/50Hz/3Phase

Previous page

Next page

Recommended Products

Welcome Your Message